Custom Engineering · Crane & Forklift Platforms

When Standard Won't Do, We Engineer Custom Man Baskets & Material Handling Platforms for Crane and Forklift Use

We take on the custom lifting and material handling projects other manufacturers turn down, engineered around your load, your rigging, and your site, not adapted from a catalog listing.

Red custom crane-suspended platform with curtain CRS3-1000 Yellow forklift-mounted custom personnel platform EFL2-2100SO Red custom crane man basket with overhead ring AKERM2-600SO Yellow custom wheeled material platform MB-250 Yellow custom crane-suspended platform VI2-600 with fold-down ramps
  • Engineering crane-suspended personnel platforms since 1987
  • OSHA 29 CFR 1926.1431 & ASME B30.23 compliant crane-suspended personnel platforms
  • OSHA 29 CFR 1926.602(c) & ANSI/ITSDF B56.1 compliant forklift-mounted personnel platforms
  • ASME B30.20 & BTH-1 compliant material handling platforms
  • 3-year warranty, every platform proof-load tested before it ships
The Problem

Standard Platforms Are Built for Typical Jobs. Yours Might Not Be One.

Standard man baskets and material platforms are engineered around typical load paths and rigging geometry. When your site is tighter, your load is heavier, the geometry is unusual, or a compliance requirement goes beyond the OSHA baseline, a standard platform gets modified in the field or the vendor search starts over. Neither is a good position to be in once a lift date is on the calendar.

The Solution

We Engineer to Your Site

We design and build crane-suspended and forklift-mounted personnel platforms, along with material handling platforms, around your actual load case, rigging interface, site geometry needs, and access constraints. If your project falls outside standard scope, that's exactly the kind of project we're built for.

Custom red crane man basket with a half-height access gate

The Complexity We're Built to Handle

Complex site access, unusual occupancy requirements, tight clearances, or an owner spec that exceeds the OSHA baseline, that's exactly the complexity we're built to handle.

Our engineering team works through it from the first conversation through a platform built to your exact needs.

Engineers reviewing custom platform drawings around a fabrication table

Built From Your Actual Load Case

Our engineers start with your actual rigging geometry, clearances, and structural load path instead of a generic spec sheet.

That's what gets the platform right the first time it goes up: no field modifications, no delayed lift dates, no guessing whether it'll clear your site.

Worker holding fall-arrest harness lanyard with carabiners

Safety Systems Engineered for This Equipment

Every platform we build is engineered, tested, documented, and built around the safety requirements that apply to it.

Our Quick Claw® Safety System locks forklift-mounted platforms securely to the forks, and our Detachable Test Weight System proof-load tests every unit before it ships, backed by full OSHA compliance documentation, a Use and Safety Handbook, and online video safety training.

Crane lifting a red man basket at a snowy mountain jobsite

One Engineering Team, Every Platform Type

Need a crane-suspended personnel platform, a forklift-mounted personnel platform, and a material handling platform for the same project?

We design all three under one roof, so you're not coordinating multiple vendors or engineering teams to get one project done. One engineering team, one point of contact, start to finish.

How a Custom Project Works

  1. Step 01

    Communicate the Challenge

    Describe the constraints you are working under and the lifting problem you are looking to solve, including details on site conditions, load, and any issues standard equipment doesn't meet.

  2. Step 02

    Custom Design and Fabrication Quote

    LT's design team will review the specification and scope of your project and work to develop a custom solution. The design idea and project pricing is returned to the customer for review.

  3. Step 03

    Customer Review

    The customer has a chance to evaluate and accept quoted design and pricing, including the option to select a full engineering review with PE stamping as part of the package.

  4. Step 04

    Engineering Review

    If PE stamping is added, the LT engineering staff draws the platform project and sends for a customer review and project approval. Following approval, both an internal LT and an additional independent 3rd party engineering review will be performed.

  5. Step 05

    Fabrication and Shipping

    Once a project has been through approval and engineering, the platform is fabricated, proof-loaded, and shipped to the customer with full compliance and testing documentation.

Who we build for
Duke Energy Safety-Kleen Énergie NB Power Orlando Cogen Okland Construction Denali Crane Inspection

Who Relies on LiftTech

Lifting Technologies is trusted by teams at Boeing, Lockheed Martin, NASA, the US Army Corps of Engineers, and the US Air Force.

Crane rental companies buy Lifting Technologies platforms outright rather than sub-renting them, and run them in repeat commercial service, that's the standard your project's platform gets built to meet.

A Few of the Challenges
We've Solved

Yellow forklift-mounted personnel work platform for an aerospace facility
Aerospace

Rocket Launch Site Forklift Mounted Personnel Work Platform

This forklift mounted personnel hoisting platform was designed for use in an aerospace facility, and contains auxiliary hoisting capacity for assistance with assembly and maintenance tasks.

The open front with safety chains facilitates ease of access to the working area, and rubber bumpers across the front face prevent damage to sensitive equipment. LT's Quick Claw Safety System provides a positive locking mechanism to the forks for an additional level of safety.

Model: EFL4-1600SO
Red round crane man basket for confined space entry at a power plant
Energy

Power Plant Combustor Man Basket, Confined Space Entry and Auxilliary Lifting Points

The ERM2-750SO/38 was a retrofit design/build for the purpose of upgrading the original OEM man basket provided with the power plant's combustor. This retrofit combined the original overhead auxiliary lifting system with a new LT man basket, bringing the system into compliance and providing a safe method to enter the confined space of the combustor and pull maintenance on fin segments while suspended.

LT was able to salvage the original auxiliary fin segment lifting system while scrapping the old non-compliant man basket, refurbish it and incorporate it with our new ERM2-750SO/38 round man basket, new man basket test weight and new auxiliary lift system test weight, along with all new wire rope sling systems.

The new basket allows for safe crane suspended confined space entry while allowing efficient removal and replacement of heavy combustor fin segments.

Model: ERM2-750SO/38
Red crane man basket with lockable kickstand for a pump station
Municipal Government

Municipal Water Treatment Pump Station Access Man Basket

The municipality had an existing in-house built personnel basket that was non-compliant. LT was tasked with engineering, designing and building an improved version that offered full compliance and the addition of several new specifications to make the maintenance tasks easier to perform while suspended.

A lower removable access panel and swing up guard rail were added for ease of access to enter, exit and perform maintenance while in the underground pump stations. External D-ring anchor points were added for tooling attachment. A fully compliant removable test weight system was designed for rapid deployment, and a lockable kickstand allowed for a freestanding unit while on or off the test weight.

The new design and quality of the build instills confidence in the maintenance crew and allows for safe and expedient completion of pump station maintenance tasks.

Model: RECO1CHAIR-300SO
Red crane-suspended personnel platform with padded safety bumper
Aerospace

Rocket Launch Site

A crane-suspended personnel platform built for hoisting personnel on an active rocket launch site, sized to the exact radius required and fitted with a padded safety bumper for close proximity to sensitive equipment.

Model: CRS-1000
Yellow forklift-mounted platform with cable spooling sheave
Mining

Underground Mining

A forklift-mounted personnel platform built for underground electrical cable spooling operations, with a height-adjustable spooling structure and replaceable UHMW cable sheaves that adapt to either end of the basket.

Model: EFL3-1600SO
Black low-profile material platform for forklift and pallet jack access
Specialty

State Aquarium

A low-profile material platform designed to hoist marine species at a state aquarium, engineered to access low-clearance areas on upper levels with forklift and pallet jack access from every side.

Model: MB-4000SP

Frequently Asked
Questions

How is a custom man basket different from a standard one?

A standard man basket is built to a common set of dimensions and load ratings that fit most jobs. A custom man basket is engineered around your specific crane, load, occupancy, and site geometry, useful when clearances are tight, the required capacity falls outside standard ratings, or your site has a configuration a catalog unit wasn't designed for.

What information do I need to request a custom quote?

Helpful details include your crane or forklift specifications, the required occupancy or load capacity, site dimensions or clearance constraints, and any site-specific safety requirements. Our engineers can also walk through this with you directly if you're not sure where to start.

Do you build personnel platforms and material handling platforms?

Yes. We engineer crane-suspended personnel platforms under OSHA 29 CFR 1926.1431 and ASME B30.23, forklift-mounted personnel platforms under OSHA 29 CFR 1926.602(c) and ANSI/ITSDF B56.1, and material handling platforms under ASME B30.20 and BTH-1, crane-suspended, forklift-mounted, or in some custom builds, both. The same engineering team handles all of it, so a project that needs more than one type stays with a single point of contact.

What safety standards do LiftTech platforms meet?

Crane-suspended personnel platforms are engineered to OSHA 29 CFR 1926.1431 and ASME B30.23. Forklift-mounted personnel platforms are engineered to OSHA 29 CFR 1926.602(c) and ANSI/ITSDF B56.1. Material handling and below-the-hook platforms are engineered to ASME B30.20 and BTH-1. Every platform ships with full compliance documentation and a Use and Safety Handbook.

Can you build a custom platform for an OEM or machine integration project?

Yes, we work with OEMs and machine builders on platforms designed around a specific piece of equipment rather than adapted from a standard unit. Reach out to our engineering team to talk through your application.

Two cranes lifting a yellow and black man basket against a blue sky
Custom Engineering Consultation

Have a Complex Lifting Challenge?

Tell us about your site, your load, and your timeline. Our engineering team will help you figure out what it takes to lift it safely and correctly, whether that's a platform from our standard line or something built from scratch.