Custom Material Platforms Gallery

Designed for use in an underground mine, this basket features a gate, casters, and a single pick bar with a central pivot that allows it to fold down and out of the way to facilitate loading and unloading.

Dimensions: 48″ X 32″ X 24″

High Capacity: 1200 lbs

Model: MB-1200SP 052456M

Designed for a chemical manufacturing plant and finished with a custom silver powder coat color, LT builds to best fit the application and can modify any specification to your requirements, even providing custom colors.

Dimensions: 48″ x X 48″ X 24″ High
Capacity: 2000 lbs
Model: MB-2000 032435M

This basket was built with two ramps opposite each other, a single pick point, and skids underneath allow for forklift access. It was designed to fit in the bed of a pickup truck.

Dimensions: 48″ x X 48″ X 24″ High
Capacity: 750 lbs
Model: MB-750SP 122308M

This platform was built with a double-opening gate for easy loading and unloading as well as skids to allow forklift access and a single pick bar below the top rail to keep the ground-to-hook height as low as possible.

Dimensions: 80″ X 55″ X 46″ High
Capacity: 1000 lbs
Model: MB-1000SP 112305M

This platform features a single pick point bar and a half round gate that swings open 180 degrees for easy loading and unloading of materials.

Dimensions: 29″ x  X 29” X 38″ High
Capacity: 1000 lbs
Model: MB-1000SP 112398M

Designed for hoisting marine species at a state aquarium, this low-profile lifting platform can access low clearance areas on upper levels and is equipped with forklift and pallet jack accessible tubes from all sides, and a removable single pick lifting bar.

Dimensions: 120″ x X 60″ X 42″ High
Capacity: 4000 lbs
Model: MB-4000SP 072367M

This material lifting platform is built with custom compartments specifically sized for the cargo, along with solid plate lids and a 3-leg sling to allow lids to open fully.

Dimensions: 72” X 54” X 14” high
Capacity : 5000 lbs
Model MB-5000  031218M

Designed for a plumbing company to accommodate long pipes with removable tool trays on each long side

Dimensions: 136″ x 48″ x 24″ high
Capacity: 4200 lbs
Model: MB-4200 061619M

This material lifting platform was custom designed for a specific lifting application that combined crane hoisting capability with the ability to transport the load by trailer once lifted into position, increasing efficiency and conserving valuable equipment resources.

Dimensions: 100″ x 66″ x 15″ high
Capacity: 1200 lbs
Model: MB-1200TR 041472M

Designed with a gate and ramp, this platform allows mechanical contractors ease of access with forklifts and pallet jacks on construction sites.

Dimensions: 72″ x X 58″ X 36″ High
Capacity: 4000 lbs
Model: MB-4000 032318M

This platform is designed to be used with a crane or a pallet jack. It also has a low profile and an extended ramp so it can be loaded easily with a pallet jack.

Dimensions: 75″ x X 53” X 42″ High
Capacity: 3000 lbs
Model: MB-3000 022309M

This MB-2000 platform has been customized for a power generation plant. Tasked with accommodating a tight landing space between the floor and crane hook, LT designed the four-leg sling with a spreader bar and inset lifting eyes to maximize the interior cargo space while fitting within the height restriction. This design also allows for lifting of longer materials with the removal of panels on both ends.

Dimensions: 84″ x X 48″ X 30″ High
Capacity: 2000 lbs
Model: MB-2000 032317M

This lifting platform is customized to lift specific equipment at a launch facility. Built to accommodate loading and unloading while suspended, it is specific to the crane and catwalk system, which has limited landing space and height between the deck and crane.

Dimensions: 36″ x X 36″ X 28″ High
Capacity: 1000 lbs
Model: MB-1000SP 022307M

Designed to be lifted with a crane or a forklift and handled with a pallet jack. This requires two sets of fork tubes to accommodate the different devices. It was built for an electric company primarily for hoisting gas turbine inlet air filters to a rooftop, and other material handling applications that may arise.

Dimensions: 120″ x 60″ X 60″ HIGH
Capacity: 2000 lbs
Model: MB-2000 012399M

This MB-1000 is on a large scale military construction project as part of a multiple lifting basket fleet. This will be utilized for smaller capacity tooling and equipment lifts where a smaller footprint fits the application better than our larger platforms in the fleet.

Dimensions: 36″ x 36″ X 24″ High
Capacity: 1000 lbs
Model: MB-1000 022303M

This material platform was designed for hoisting materials, parts and equipment in a manufacturing facility, this platform is built to access upper floor levels without removal of safety railings and with custom fork tubes for hoisting by forklift or pallet jack.

Dimensions: 55″ x 55″ X 32″ High
Capacity: 3000 lbs
Model: MB-3000SP 102276M

This material platform is designed for a utility company to separate tools from hardware while hoisted by boom trucks on work sites.

Dimensions: 18″ x 18″ x 16″ High
Capacity: 500 lbs
Model: MB-500(A) 092261M, 092262M

This material platform is designed for crane hoisting of tools, parts, and products in a chemical manufacturing plant expansion project.

Dimensions: 38.5″ x 26.5″ x 21″ High
Capacity: 500 lbs
Model: MB-500SP 092249M

This material platform is designed for crane hoisting of tools and misc. items. Solid floor with gate for easy access. Swivel and locking caster allow for moving around on the ground.

Dimensions: 30″ x 30″ x 16″ High
Capacity: 300 lbs
Model: MB-300SP 082245M

This is a material platform designed for crane hoisting of tools and misc. items. Solid floor with ramp for easy access. Fork tubes and caster allow for moving around on the ground.

Dimensions: 60″ x x60″ x 12″ High
Capacity: 2000 lbs
Model: MB-2000 072230M

This material platform is designed for crane hoisting of tools and misc. items. Solid floor with gate for easy access.

Dimensions: 36″ Diam x 36″ High
Capacity: 1000 lbs
Model: MB-1000 072233M

This material platform is designed for crane hoisting of tools and misc. items. Drop down ramp and skids for forklift access.

Dimensions: 40″ x 20″ X 18″ High
Capacity: 3500 lbs
Model: MB-3500SP 062227M

This material basket is designed for crane hoisting and has a separate cart with casters to move the platform around on the ground.

Dimensions: 27″ x 27″ x 30″
Capacity: 500 lbs
Model: MB-500SP 062225M

This material basket is designed for crane hoisting, as well as forklift access. It has a gate on the opposite ramp for easy access depending application of the platform.

Dimensions: 56″ x 54″ x 36″
Capacity: 5000 lbs
Model: MB-5000 052221M

This material basket is designed for crane hoisting and of tools and misc. items.

Dimensions: 36″ Diam x 36″ High
Capacity: 1000 lbs
Model: MB-1000(B) 032205M

This platform is designed for crane hoisting in a warehouse shaft. It has UHMW guides to fit in a C-channel as it is raised and lowered.

Dimensions: 34.25″ x 41″ x 12″
Capacity: 2000 lbs
Model: MB-2000SP 092154M

This material platform is designed for crane hoisting and fork tubes for moving material at a refinery. It has a diamond plate floor with drains holes.

Dimensions: 50″ x 50″ x 63″
Capacity: 2000 lbs
Model: MB-2000SP 022295M

Designed for crane hoisting. Also has casters and fork pockets to move while on the ground.

Dimensions: 72″ x 40″ x 40″
Capacity: 2500 lbs
Model: MB-2500 112178M

Designed for crane hoisting. This material-only platform also features forklift access for moving on the ground. It has 4 hooks to allow the hanging of cords and hoses at a utility plant.

Dimensions: 48″ x 48″ x 36″
Capacity: 2000 lbs
Model: MB-2000SP 122182M

LT’s custom round crane material hoisting platform with casters, built for an energy plant.

Dimensions: 28″ DIAM x 36″ H
Capacity: 1500 lbs
Model: MB-1500 102157M

Material platform designed for crane hoisting and forklift transportation. Its design makes it stackable and has a removable panel for easy access. It’s currently being used to move parts during power outages.

Dimensions: 65″ x 38″ x 18″
Capacity: 1200 lbs
Model: MB-1200 102158M

Designed for crane hoisting, this platform also features forklift access as well as casters for rolling. The platform has a gate for loading material.

Dimensions: 48″ x 48″ x 48″
Capacity: 4000 lbs
Model: MB-4000 092155M

Stackable material hoisting platforms for crane or forklift hoisting, built to your required specifications

Dimensions: 51″ x 51″ x 24″
Capacity: 2000 lbs
Model: MB-2000 072117M & 072118M

This material-handling platform can be used both with cranes or forklifts. It features access gates on both ends and fork tube support. This shipped to Savannah, GA to be used at a paper mill.

Dimensions: 78″ x 52″ x 24″
Capacity: 1500lbs
Model: MB-1500 062008M

This is a material hoisting round platform. It has solid floor and a 2-leg sling. This shipped to a Birmingham, AL company for use in their packaging manufacturing facility.

Dimensions: 36″ diameter
Capacity: 1000lbs
Model: MB-1000 062006M

This is a material-only platform with solid sides and floor. It can be both crane-suspended and forklift-mounted.
LT crafted this material-handling platform for a manufacturer of turnkey custom machines for aerospace, automotive manufacturing, and shipbuilding.

Dimensions: 48″x48″x24″
Capacity: 1500lbs
Model: MB-1500 062007M

Designed for crane hoisting and dolly transportation of gas cylinders.

Dimensions: 16″ x 16″ x 26″
Capacity: 150 lbs
Model: MB-150SP 022153M

This platform is designed for hoisting portable toilets on construction sites. Equipped with forklift/pallet jack access and access gate.

Dimensions: 55″ x 54″ x 92″
Capacity: 1500 lbs
Model: MB-1500 012146M

This material hoisting platform has a drop-down gate for access, fork pockets with safety chains, LT’s sling assembly (as do all our material platforms) and casters for easy movement on the floor. This platform shipped to a paper manufacturer in MS.

Dimensions: 66″ x 42″ x 12″
Capacity: 2,000lbs
Model: MB-2000 012149M

This is a material platform designed with a hinged lid, supported by basket skids for forklift access and with heavy-duty grating floor. This shipped to a manufacturer in Georgia for hoisting dies to their machinery.

Dimensions: 36.5″ x 18.5″ x 12″ high.
Capacity: 500lbs
Model: MB-500 122044M

This platform can be crane suspended and used with forklifts. Features are ramp with nonskid tape, smooth plate floor, locking swivel casters, and LT’s I-beam frame. This platform shipped to Washington to be used at a hydropower facility.

Dimensions: 60″ x 48″ x 48″
Capacity: 4,000 lbs
Model: MB-4000 122043M

This material-only platform is designed for dumping. It has quick-release pins with a sloped end, releasing the slings from the platform, for dumping out contents. It also has fork tubes for moving the platform around on the ground with a forklift.

Dimensions: 96″x48″x30″
Capacity: 6,000 lbs
Model: MB-6000 061942M

This material platform was designed light to accommodate the available lifting capacity and has a short custom sling to accommodate a height restriction. This platform shipped to a supply distribution center in Ohio.

Dimensions: 52.5″ x 52.5″ x 24″
Capacity: 200lbs
Model: MB-200 112039M

This material handling platform has a custom 30″ sling and a solid floor. It is shipping to NY and will be used to move chemicals and resin in a manufacturing plant.

Dimensions: 24″ x 24″ x 12″
Capacity: 400lbs
Model: MB-400 112040M

Crane suspended material basket with ramp, heavy-duty grating floor, supported by LT’s I-beam frame with fork pockets. An Oregon equipment manufacturer purchased this for use at its production facility.

Dimensions: 48″ x 48″ x 24″
Capacity: 2500lbs
Model: MB-2500 102033M 102034M

This platform is a single pick for crane suspension and supported by basket skids for forklift access. It is designed with a 1/2 gate over 1/2 ramp for use in confined spaces.

Dimensions: 40″ x 36″ x 36″
Capacity: 1000lbs
Model: MB-1000SP 062012M

Built for a chemical manufacturing facility, this multi-purpose and heavy-duty lifting platform will hoist supplies, parts and maintenance equipment to various levels within the plant.

Dimensions: 53″x52″x36
Capacity: 2000lbs
Model: MB-2000SP 072020M

This single pick material hoisting platform offers a 1/2 gate 1/2 ramp access opening, swivel casters with brakes and LT’s heavy gauge solid plate floor.

Dimensions: 51″ x 48″ x 30″
Capacity: 550lbs
Model: MB-550SP 082022M

This material handling platform is equipped with pad eyes for customer provided rigging, fork tubes, drop-down ramp with non-skid tape and E-track for securing cargo.

Dimensions: 42″ x 39″ x 60″
Capacity: 3000 lbs
Model: MB-3000 072019M

Material handling platform to be used with a forklift only. Three enclosed sides with open front, and LT’s pin safety system for safe and secure attachment to fork heels.

Dimensions: 96″ x 48″ x 48
Capacity: 2000lbs
Model: MB-2000FL 082023M

This single pick crane suspended material platform is supported by basket skids for easy forklift and pallet jack access, and provides an access gate and heavy gauge solid plate floor.

Dimensions: 48″ x 48″ x 18″
Capacity: 500lbs
Model: MB-500SP 082024M

Single pick crane suspended material platform with ramp, bolt in diamond plate floor, total locking swivel casters, and heavy-duty protective cover.

Dimensions: 63″ x 51″ x 72″
Capacity: 1000lbs
Model: MB-1000SP 092026M

Single pick material platform, crane suspended. This material platform is unique with its double hinged lids.

Dimensions: 48″ x 24″ x 30″
Capacity: 1500lbs
Model: MB-1500SP 102038M

This high capacity material handling platform is equipped with double access gates and a removable bar over the gate opening that must be in place for platform stability during lifting. Supported by LT’s I-beam frame, the platform provides a heavy-duty grating floor and fork tubes.

Dimensions: 202″ x 60″ x 48″ high
Capacity: 10,000lbs
Model: MB-10000 082025M

Crane suspended material handling platform, single pick with 2” hole, ramp, and casters. Shipped to Tuscon, AZ

Dimensions: 24″ X 36″ X 21″
Capacity: 300lbs
Model: MB-300SP 062011M

This custom material basket has a ramp and gate opposite of each other with non-skid tape on the high capacity ramp. LT’s I-beam frame with fork tubes supports the platform for the ultimate design in safety.

Dimensions: 72″ X 42″ X 36″
Capacity: 4000lbs
Model: MB-4000 062009M

This material basket can be used with either a crane or forklift and shipped to a pulp mill in NC for use on their paper machines.

Dimensions: 115″ x 53″ x 24″
Capacity: 1000lbs
Model: MB-1000 062010M

This is a small format, single pick crane suspended material handling platform.

Dimensions: 24″ x 24″ x 12
Capacity: 500lbs
Model: MB-500SP 072014M

Material platform, single pick 24″ above the top rail.

Dimensions: 30″ x 30″ x 16″
Capacity: 500lbs
Model: MB-500SP 072017M

This material handling platform is compartmentalized for separation of products. Riser legs keep it at an ergonomically comfortable working height with casters for maneuverability.

Dimensions: 129″ x 39″ x 24″
2,000 lb capacity
Model: MB-2000 072018M

Designed for crane suspension, this material basket is also supported by skids for forklift access. It has a double-hinged lid designed to lock, and a ramp.

Dimensions: 81″ x 47″ x 15″
Capacity: 500lbs
Model: MB-500 072016M

Commissioned for North Carolina pulp mill. Crane and forklift capable.

1,000 lb capacity
Model: MB-1000 06201M

This platform has dual access gates with a removable bar over the opening. Commissioned by a mid-western college for their physical plant.

Dimensions: 84″ x 72″ x 36″
Capacity: 4000lbs
Model: MB-4000 082021M

Material platform for marine application, treated plywood floor over heavy-duty grating.

Dimensions: 63″ x 63″ x 63″
Capacity: 3350lbs
Model: MB-3350 092029M 092030M